TTCN-3 Forum :: Topic: parameters from TTCN to TRI ? (1/1)

Welcome, Guest

TOPIC: parameters from TTCN to TRI ?

parameters from TTCN to TRI ? 05 Sep 2007 16:52 #7226

Mathieu Morvan
OFFLINE
Fresh Boarder
Posts: 2
Karma: 0

Hello.

I would like to know if it's possible for the TRI to get parameters from
TTCN.

I would like to define parameters in my TTCN Code in order to configure my
TRI, but I haven't found functions to get the parameters of a module, except
the TCI ones (tciGetModuleParameters and tciGetModulePar) that seem not to
useable by the TRI.

Does such a function exist ?

Thanks and best regards,

Mathieu Morvan.

The administrator has disabled public write access.

parameters from TTCN to TRI ? 06 Sep 2007 05:28 #7227

Schieferdecker, Ina
OFFLINE
Expert Boarder
Posts: 96
Karma: 0

Dear Mathieu,

there is a separation of functionality between TRI and TCI ... only both
together offer you the complete functionality provided by the TTCN-3
execution interfaces ... just use TCI-TM for your purpose.

Cheers, Ina.

________________________________

From: active_ttcn3 : mts stf133 ttcn version 3 - active members
only [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of Mathieu Morvan
Sent: Wednesday, September 05, 2007 6:53 PM
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Subject: parameters from TTCN to TRI ?

Hello.

I would like to know if it's possible for the TRI to get
parameters from TTCN.

I would like to define parameters in my TTCN Code in order to
configure my TRI, but I haven't found functions to get the parameters of
a module, except the TCI ones (tciGetModuleParameters and
tciGetModulePar) that seem not to useable by the TRI.

Does such a function exist ?

Thanks and best regards,

Mathieu Morvan.

The administrator has disabled public write access.

parameters from TTCN to TRI ? 06 Sep 2007 09:24 #7230

Stephan Schulz
OFFLINE
Moderator
Posts: 73
Karma: 0

Hi,

If I understand you question correcttly you wanted to know how you can
communicate/configure your SUT adapter. Module parameters are not the
correct way.

But you can just use the TTCN-3 message and the send statement to
communicate (configuration) parameter values .. and potentially also
create a separate SA configuration port which can send/receive such
messages. Then when you get messages on that port the SA can be
implemented to take this as configuration info .., i.e., to not
transport it to the SUT.

Hope this helps,
stephan

>

Original Message

> From: active_ttcn3 : mts stf133 ttcn version 3 - active
> members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of Mathieu Morvan
> Sent: 05 September 2007 18:53
> To: TTCN3
> Subject: parameters from TTCN to TRI ?
>
> This is a multi-part message in MIME format.
>
>

=_NextPart_000_0001_01C7EFED.F166C400
> Content-Type: text/plain;
> charset="us-ascii"
> Content-Transfer-Encoding: 7bit
>
> Hello.
>
>
>
>
>
> I would like to know if it's possible for the TRI to get
> parameters from TTCN.
>
> I would like to define parameters in my TTCN Code in order to
> configure my TRI, but I haven't found functions to get the
> parameters of a module, except the TCI ones
> (tciGetModuleParameters and tciGetModulePar) that seem not to
> useable by the TRI.
>
>
>
> Does such a function exist ?
>
>
>
>
>
> Thanks and best regards,
>
> Mathieu Morvan.
>
>
>

=_NextPart_000_0001_01C7EFED.F166C400
> Content-Type: text/html;
> charset="us-ascii"
> Content-Transfer-Encoding: quoted-printable
>
> <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
> xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
> xmlns=3D"www.w3.org/TR/REC-html40">
>
> <head>
> <meta http-equiv=3DContent-Type content=3D"text/html; =
> charset=3Dus-ascii"> <meta name=3DGenerator
> content=3D"Microsoft Word 11 (filtered medium)"> <style>
> 
> </style>
>
> </head>
>
> <body lang=3DFR link=3Dblue vlink=3Dpurple>
>
> <div class=3DSection1>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>Hello.<o:p></o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'><o:p> </o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'><o:p> </o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>I would like to know if it’s
> possible = for the TRI to get parameters from
> TTCN.<o:p></o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>I would like to define parameters
> in my TTCN = Code in order to configure my TRI, but I
> haven’t found functions to get = the parameters of a
> module, except the TCI ones (tciGetModuleParameters and
> tciGetModulePar) that seem not to useable by the =
> TRI.<o:p></o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'><o:p> </o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>Does such a function exist =
> ?<o:p></o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'><o:p> </o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'><o:p> </o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>Thanks and best =
> regards,<o:p></o:p>
>
> style=3D'font-size:
> 10.0pt;font-family:Arial'>Mathieu Morvan.<o:p></o:p>
>
> </div>
>
> </body>
>
> </html>
>
>

=_NextPart_000_0001_01C7EFED.F166C400--
>

The administrator has disabled public write access.

parameters from TTCN to TRI ? 06 Sep 2007 11:52 #7231

Mathieu Morvan
OFFLINE
Fresh Boarder
Posts: 2
Karma: 0

Hello,

It's exactly that : I want TTCN to configure my SA.

So according to you Stephan, what I have to do is to generate
"configuration" messages (from module parameters) and send those messages on
a "SA configuration port".

But I don't think I can use this solution, cause those parameters are used
by functions triSAReset and triMap, so before any communication can be done.

Thanks for your answers all. I will investigate both solutions.

Mathieu.

Message d'origine

De : active_ttcn3 : mts stf133 ttcn version 3 - active members only
[This email address is being protected from spambots. You need JavaScript enabled to view it.] De la part de Stephan Schulz
Envoyé : jeudi 6 septembre 2007 11:25
À : This email address is being protected from spambots. You need JavaScript enabled to view it.
Objet : Re: parameters from TTCN to TRI ?

Hi,

If I understand you question correcttly you wanted to know how you can

communicate/configure your SUT adapter. Module parameters are not the

correct way.

But you can just use the TTCN-3 message and the send statement to

communicate (configuration) parameter values .. and potentially also

create a separate SA configuration port which can send/receive such

messages. Then when you get messages on that port the SA can be

implemented to take this as configuration info .., i.e., to not

transport it to the SUT.

Hope this helps,

stephan

>

Original Message

> From: active_ttcn3 : mts stf133 ttcn version 3 - active

> members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of Mathieu Morvan

> Sent: 05 September 2007 18:53

> To: TTCN3

> Subject: parameters from TTCN to TRI ?

>

> This is a multi-part message in MIME format.

>

>

=_NextPart_000_0001_01C7EFED.F166C400

> Content-Type: text/plain;

> charset="us-ascii"

> Content-Transfer-Encoding: 7bit

>

> Hello.

>

>

>

>

>

> I would like to know if it's possible for the TRI to get

> parameters from TTCN.

>

> I would like to define parameters in my TTCN Code in order to

> configure my TRI, but I haven't found functions to get the

> parameters of a module, except the TCI ones

> (tciGetModuleParameters and tciGetModulePar) that seem not to

> useable by the TRI.

>

>

>

> Does such a function exist ?

>

>

>

>

>

> Thanks and best regards,

>

> Mathieu Morvan.

>

>

>

=_NextPart_000_0001_01C7EFED.F166C400

> Content-Type: text/html;

> charset="us-ascii"

> Content-Transfer-Encoding: quoted-printable

>

> <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =

> xmlns:w=3D"urn:schemas-microsoft-com:office:word" =

> xmlns=3D"www.w3.org/TR/REC-html40">

>

> <head>

> <meta http-equiv=3DContent-Type content=3D"text/html; =

> charset=3Dus-ascii"> <meta name=3DGenerator

> content=3D"Microsoft Word 11 (filtered medium)"> <style>

> 

> </style>

>

> </head>

>

> <body lang=3DFR link=3Dblue vlink=3Dpurple>

>

> <div class=3DSection1>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>Hello.<o:p></o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'><o:p> </o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'><o:p> </o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>I would like to know if it’s

> possible = for the TRI to get parameters from

> TTCN.<o:p></o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>I would like to define parameters

> in my TTCN = Code in order to configure my TRI, but I

> haven’t found functions to get = the parameters of a

> module, except the TCI ones (tciGetModuleParameters and

> tciGetModulePar) that seem not to useable by the =

> TRI.<o:p></o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'><o:p> </o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>Does such a function exist =

> ?<o:p></o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'><o:p> </o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'><o:p> </o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>Thanks and best =

> regards,<o:p></o:p>

>

> style=3D'font-size:

> 10.0pt;font-family:Arial'>Mathieu Morvan.<o:p></o:p>

>

> </div>

>

> </body>

>

> </html>

>

>

=_NextPart_000_0001_01C7EFED.F166C400--

>

The administrator has disabled public write access.

parameters from TTCN to TRI ? 06 Sep 2007 13:51 #7232

Stephan Schulz
OFFLINE
Moderator
Posts: 73
Karma: 0

Hi,

Generate means to define (my hand) configuration message types and
potentially subtypes .. Based on the parameters. Then define a port type
based on the config messages. And then instantiate ports on the test and
system components that can be used/dedicated to exchange configuration
messages with the SUT adapter.

Stephan

>

Original Message

> From: active_ttcn3 : mts stf133 ttcn version 3 - active
> members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of Mathieu Morvan
> Sent: 06 September 2007 13:53
> To: TTCN3
> Subject: Re: parameters from TTCN to TRI ?
>
> This is a multi-part message in MIME format.
>
>

=_NextPart_000_0001_01C7F08D.36252F10
> Content-Type: text/plain;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
> Hello,
>
> =20
>
> =20
>
> It's exactly that : I want TTCN to configure my SA.
>
> =20
>
> So according to you Stephan, what I have to do is to generate
> "configuration" messages (from module parameters) and send
> those = messages on a "SA configuration port".
>
> =20
>
> But I don't think I can use this solution, cause those
> parameters are = used by functions triSAReset and triMap, so
> before any communication can be = done.
>
> =20
>
> =20
>
> Thanks for your answers all. I will investigate both solutions.
>
> Mathieu.
>
> =20
>
> =20
>
>

Message d'origine

> De : active_ttcn3 : mts stf133 ttcn version 3 - active
> members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] De la part de Stephan Schulz
> Envoy=E9 : jeudi 6 septembre 2007 11:25
> =C0 : This email address is being protected from spambots. You need JavaScript enabled to view it.
> Objet : Re: parameters from TTCN to TRI ?
>
> =20
>
> Hi,
>
> =20
>
> If I understand you question correcttly you wanted to know how you can
>
> communicate/configure your SUT adapter. Module parameters are not the
>
> correct way.
>
> =20
>
> But you can just use the TTCN-3 message and the send statement to
>
> communicate (configuration) parameter values .. and potentially also
>
> create a separate SA configuration port which can send/receive such
>
> messages. Then when you get messages on that port the SA can be
>
> implemented to take this as configuration info .., i.e., to not
>
> transport it to the SUT.
>
> =20
>
> Hope this helps,
>
> stephan=20
>
> =20
>
> >

Original Message

>
> > From: active_ttcn3 : mts stf133 ttcn version 3 - active=20
>
> > members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of
> Mathieu Morvan
>
> > Sent: 05 September 2007 18:53
>
> > To: TTCN3
>
> > Subject: parameters from TTCN to TRI ?
>
> >=20
>
> > This is a multi-part message in MIME format.
>
> >=20
>
> >

=3D_NextPart_000_0001_01C7EFED.F166C400
>
> > Content-Type: text/plain;
>
> > charset=3D"us-ascii"
>
> > Content-Transfer-Encoding: 7bit
>
> >=20
>
> > Hello.
>
> >=20
>
> > =20
>
> >=20
>
> > =20
>
> >=20
>
> > I would like to know if it's possible for the TRI to get=20
>
> > parameters from TTCN.
>
> >=20
>
> > I would like to define parameters in my TTCN Code in order to=20
>
> > configure my TRI, but I haven't found functions to get the=20
>
> > parameters of a module, except the TCI ones=20
>
> > (tciGetModuleParameters and tciGetModulePar) that seem not to=20
>
> > useable by the TRI.
>
> >=20
>
> > =20
>
> >=20
>
> > Does such a function exist ?
>
> >=20
>
> > =20
>
> >=20
>
> > =20
>
> >=20
>
> > Thanks and best regards,
>
> >=20
>
> > Mathieu Morvan.
>
> >=20
>
> >=20
>
> >

=3D_NextPart_000_0001_01C7EFED.F166C400
>
> > Content-Type: text/html;
>
> > charset=3D"us-ascii"
>
> > Content-Transfer-Encoding: quoted-printable
>
> >=20
>
> > <html xmlns:o=3D3D"urn:schemas-microsoft-com:office:office" =3D=20
>
> > xmlns:w=3D3D"urn:schemas-microsoft-com:office:word" =3D=20
>
> > xmlns=3D3D"www.w3.org/TR/REC-html40">
>
> >=20
>
> > <head>
>
> > <meta http-equiv=3D3DContent-Type content=3D3D"text/html; =3D=20
>
> > charset=3D3Dus-ascii"> <meta name=3D3DGenerator=20
>
> > content=3D3D"Microsoft Word 11 (filtered medium)"> <style>
>
> > 
>
> > </style>
>
> >=20
>
> > </head>
>
> >=20
>
> > <body lang=3D3DFR link=3D3Dblue vlink=3D3Dpurple>
>
> >=20
>
> > <div class=3D3DSection1>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>Hello.<o:p></o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'><o:p> </o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'><o:p> </o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>I would like to know if it’s=20
>
> > possible =3D for the TRI to get parameters from=20
>
> > TTCN.<o:p></o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>I would like to define parameters=20
>
> > in my TTCN =3D Code in order to configure my TRI, but I=20
>
> > haven’t found functions to get =3D the parameters of a=20
>
> > module, except the TCI ones (tciGetModuleParameters and
>
> > tciGetModulePar) that seem not to useable by the =3D=20
>
> > TRI.<o:p></o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'><o:p> </o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>Does such a function exist =3D=20
>
> > ?<o:p></o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'><o:p> </o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'><o:p> </o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>Thanks and best =3D=20
>
> > regards,<o:p></o:p>
>
> >=20
>
> > lang=3D3DEN-US =3D
>
> > style=3D3D'font-size:
>
> > 10.0pt;font-family:Arial'>Mathieu
> Morvan.<o:p></o:p>
>
> >=20
>
> > </div>
>
> >=20
>
> > </body>
>
> >=20
>
> > </html>
>
> >=20
>
> >

=3D_NextPart_000_0001_01C7EFED.F166C400--
>
> >=20
>
>
>

=_NextPart_000_0001_01C7F08D.36252F10
> Content-Type: text/html;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
> <html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
> xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
> xmlns=3D"www.w3.org/TR/REC-html40">
>
> <head>
> <meta http-equiv=3DContent-Type content=3D"text/html; =
> charset=3Diso-8859-1"> <meta name=3DGenerator
> content=3D"Microsoft Word 11 (filtered medium)"> <style>
> 
> </style>
>
> </head>
>
> <body lang=3DFR link=3Dblue vlink=3Dpurple>
>
> <div class=3DSection1>
>
> New"> style=3D'font-size:10.0pt'>Hello,<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">It's
> exactly that : I want TTCN to configure = my
> SA.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">So
> according to you Stephan, what I have to = do is to generate
> "configuration" messages (from module parameters)
> and = send those messages on a "SA configuration =
> port".<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">But I
> don't think I can use this solution, = cause those parameters
> are used by functions triSAReset and triMap, so before any
> communication can be done.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">Thanks
> for your answers all. I will = investigate both
> solutions.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>Mathieu.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New"> style=3D'font-size:10.0pt'>

Message d'origine

> De : active_ttcn3 : mts stf133 ttcn version 3 - active
> members only [This email address is being protected from spambots. You need JavaScript enabled to view it.] De la part de
> Stephan Schulz 
> Envoy=E9 : jeudi 6 septembre 2007 11:25 
> =C0 : This email address is being protected from spambots. You need JavaScript enabled to view it. 
> Objet : Re: parameters from TTCN to TRI =
> ?<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New"> style=3D'font-size:10.0pt'>Hi,<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">If I
> understand you question correcttly you = wanted to know how
> you can<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>communicate/configure your SUT
> adapter. = Module parameters are not the<o:p></o:p>
>
> New">correct
> way.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">But you
> can just use the TTCN-3 message and = the send statement
> to<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>communicate (configuration)
> parameter values = .. and potentially
> also<o:p></o:p>
>
> New">create a
> separate SA configuration port which = can send/receive
> such<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>messages. Then when you get
> messages on that = port the SA can be<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>implemented to take this as
> configuration = info .., i.e., to not<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'>transport it to the =
> SUT.<o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">Hope
> this helps,<o:p></o:p>
>
> New">stephan
> <o:p></o:p>
>
> New"> style=3D'font-size:10.0pt'><o:p> </o:p>
>
> New">>
>

Original = Message

<o:p></o:p>
>
> New">>
> From: active_ttcn3 : mts stf133 ttcn = version 3 - active
> <o:p></o:p>
>
> New">>
> members only = [This email address is being protected from spambots. You need JavaScript enabled to view it.] On Behalf Of
> Mathieu Morvan<o:p></o:p>
>
> New">>
> Sent: 05 September 2007 = 18:53<o:p></o:p>
>
> New">> To:
> TTCN3<o:p></o:p>
>
> New">>
> Subject: parameters from TTCN to TRI = ?<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> This is a multi-part message in MIME =
> format.<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
>

=3D_NextPart_000_0001_01C7EFED.F166C400<o:p></o:p> ></p=
> >
>
> New">>
> Content-Type: = text/plain;<o:p></o:p>
>
> New">>
> =A0=A0=A0 =
> charset=3D"us-ascii"<o:p></o:p>
>
> New">>
> Content-Transfer-Encoding: = 7bit<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> Hello.<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>=A0
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>=A0
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> I
> would like to know if it's possible = for the TRI to get
> <o:p></o:p>
>
> New">>
> parameters from = TTCN.<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> I
> would like to define parameters in my = TTCN Code in order to
> <o:p></o:p>
>
> New">>
> configure my TRI, but I haven't found = functions to get the
> <o:p></o:p>
>
> New">>
> parameters of a module, except the TCI = ones
> <o:p></o:p>
>
> New">>
> (tciGetModuleParameters and =
> tciGetModulePar) that
> seem not to <o:p></o:p>
>
> New">>
> useable by the = TRI.<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>=A0
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> Does such a function exist = ?<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>=A0
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>=A0
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> Thanks and best = regards,<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> Mathieu = Morvan.<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
>

=3D_NextPart_000_0001_01C7EFED.F166C400<o:p></o:p> ></p=
> >
>
> New">>
> Content-Type: = text/html;<o:p></o:p>
>
> New">>
> =A0=A0=A0 =
> charset=3D"us-ascii"<o:p></o:p>
>
> New">>
> Content-Transfer-Encoding: =
> quoted-printable<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> <html
> xmlns:o=3D3D"urn:schemas-microsoft-com:office:office"
> ; =3D = <o:p></o:p>
>
> New">>
> xmlns:w=3D3D"urn:schemas-microsoft-com:office:word"
> =3D = <o:p></o:p>
>
> New">> =
> xmlns=3D3D"www.w3.org/TR/REC-html40">;<o:p>
> </o:p></spa=
> n>
>
> New">>
> <o:p></o:p>
>
> New">> =
> <head><o:p></o:p>
>
> New">>
> <meta http-equiv=3D3DContent-Type
> content=3D3D"text/html; =3D <o:p></o:p>
>
> New">>
> charset=3D3Dus-ascii"> <meta name=3D3DGenerator
> <o:p></o:p>
>
> New">>
> content=3D3D"Microsoft Word 11 = (filtered
> medium)"> <style><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
> </style><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
> </head><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> <body lang=3D3DFR link=3D3Dblue =
> vlink=3D3Dpurple><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> <div = class=3D3DSection1><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>Hello.<o:p></o:p><
> /span>&l=
> t;/font><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'><o:p> </o:p>
> </span&g=
> t;<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'><o:p> </o:p>
> </span&g=
> t;<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>I would = like to know if
> it’s <o:p></o:p>
>
> New">>
> possible =3D for the TRI to get = parameters from
> <o:p></o:p>
>
> New">>
> TTCN.<o:p></o:p></p&g
> t;<o:p></o:=
> p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>I would = like to define
> parameters <o:p></o:p>
>
> New">> in
> my TTCN =3D Code in order to = configure my TRI, but I
> <o:p></o:p>
>
> New">>
> haven’t found functions to get = =3D the parameters
> of a <o:p></o:p>
>
> New">>
> module, except the TCI ones (tciGetModuleParameters
> and<o:p></o:p>
>
> New">>
> tciGetModulePar) that seem not to = useable by the =3D
> <o:p></o:p>
>
> New">>
> TRI.<o:p></o:p>
> ;<o:p></o:p=
> >
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'><o:p> </o:p>
> </span&g=
> t;<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>Does such a = function exist =3D
> <o:p></o:p>
>
> New">>
> ?<o:p></o:p><o
> :p></o:p></=
> span>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'><o:p> </o:p>
> </span&g=
> t;<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'><o:p> </o:p>
> </span&g=
> t;<o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>Thanks and = best =3D
> <o:p></o:p>
>
> New">>
> regards,<o:p></o:p></
> p><o:p><=
> /o:p>
>
> New">>
> <o:p></o:p>
>
> New">>
> size=3D3D2
> face=3D3DArial> =3D<o:p></o:p>
>
> New">> =
> style=3D3D'font-size:<o:p></o:p>
>
> New">>
> 10.0pt;font-family:Arial'>Mathieu
> Morvan.<o:p></o:p> ><o:p></=
> o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
> </div><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
> </body><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
> </html><o:p></o:p>
>
> New">>
> <o:p></o:p>
>
> New">> =
>

=3D_NextPart_000_0001_01C7EFED.F166C400--<o:p></o:p></sp
> an><=
> /p>
>
> New">>
> <o:p></o:p>
>
> </div>
>
> </body>
>
> </html>
>
>

=_NextPart_000_0001_01C7F08D.36252F10--
>

The administrator has disabled public write access.

Forum

TTCN-3 Mailing List

Mailing List Archive

parameters from TTCN to TRI ?